Canon CR-N700 4K PTZ Camera with 15x (Satin Black) - Manual (Page 17)

17
Select cameras to operate from this software.
Turning On the Camera
All cameras can be turned on or put into standby simultaneously using this software.
• Turning on the cameras
Click the menu and select [Camera Power] > [All On]. All cameras on standby in the video display area are turned
on.
• Setting cameras to standby
Click the menu and select [Camera Power] > [All Standby]. All cameras in the video display area are set to standby.
Recording Camera Video
All camera video can be recorded and recording can be stopped using this software.
• Starting recording
Click the menu , and select [Recording/Media] > [Start Recording All]. Recording of all cameras displayed in the
video display area is started.
• Stopping recording
Click the menu , and select [Recording/Media] > [Stop Recording All]. Recording of all cameras displayed in the
video display area is stopped.
Saving Camera Setting Values
Click menu and [Save Camera Settings]. The Save Camera Settings window opens.
Select a camera whose [Status] is [Saveable] and click [Save]. The [Confirmation] dialog appears. Click [OK] to save the
PTZF and camera settings under Preset 1. In addition, the detailed Custom Picture setting values are saved in the camera
itself. It may take several seconds to save the setting values.
When setting values are successfully saved, [Successful] is displayed at [Result], and when saving fails, [Failed] is
displayed.
Multiple cameras can be selected by holding down the Ctrl key and clicking when selecting cameras.
Selecting Cameras to Operate