Canon CR-N700 4K PTZ Camera with 15x (Satin Black) - Manual (Page 25)

25
[White Balance]
Camera white balance adjustment is available.
In infrared shooting, [Basic] > [White Balance] cannot be set.
[Mode]
Sets white balance according to the color temperature of light sources such as illuminations and sunlight. Adjustment
procedure is as follows:
[Auto]
Adjust the white balance so that it is always optimal. The white balance is automatically adjusted as the color
temperature of the light source changes.
[Color Temperature]
Specify [Color Temperature] to adjust the white balance.
[Daylight]
Sets the white balance according to the sunlight.
[Tungsten]
Sets the white balance according to tungsten lighting. Use this setting when shooting under tungsten or tungsten colored
fluorescent lighting.
[Manual]
Set [R Gain] and [B Gain] for the white balance to the desired value. Move the slider knob or click or to change
the value.
[Set A], [Set B]
Executing [White Balance Calibration] captures the reference white color in the actual shooting environment.
The settings are erased when the camera is restarted or turned on/off. In order to save the settings, register as a preset
in the camera’s Settings Page.
[AWB Lock]
AWB operation stops temporarily when [Lock] is clicked when the mode is set to [Auto]. Clicking [Lock] again resumes
AWB operation.
Note
• In infrared shooting, [White Balance] cannot be set.