Canon CR-N700 4K PTZ Camera with 15x (Satin Black) - Manual (Page 34)

34
Preset Function
Able to register or delete presets from this software.
[Preset] tab
(1) Preset List
Displays [Number], [Preset Name], and [Register] of the presets as a list. Change the [Preset Name] by double-
clicking [Preset Name] and entering an arbitrary name.
(2) [Add]
Registers a preset and adds it to the list. For more information, refer to “Registering Presets” (P. 34).
(3) [Execute]
Click this button to execute the currently selected preset.
(4) [Stop]
Click this button to stop the currently operating preset.
(5) [Delete]
Delete a preset by selecting it from the [Preset List] and clicking [Delete].
(6) [Register]
Select the setting value to register for the preset. If [PTZF] is checked, the pan/tilt/zoom position, [Focus] and [Speed Lv.]
are registered as presets. The [Speed Lv.] value can be changed by moving the slider knob or clicking or . If
[Camera Settings] is checked, the following items are registered as presets:
• [Basic] > [Exposure], [White Balance]
• [Details] > [White Balance], [Image Quality]
Registering Presets
To register a preset, follow the procedure below.
Camera video appears in the video display area.
Adjust the camera angle to the position where desired to register the preset and adjust image quality, by
operating the camera operation area. Also, check the settings to register in [PTZF] or [Camera Settings] under
[Preset List].
(1)
(2)
(3)
(4)
(5)
(6)
1 In the [Preset/Trace Settings] dialog, open the [Preset] tab.
2 Select the camera from the [Camera Name] list for which to register a preset.
3 Use the camera operation area to set a camera to register the presets.