SmartSystem Matrix Sled Chimera (Gold Mount) - Manual (Page 16)

16
T
he dovetail clamp creates tremendous clamping force with very little pressure at the clamp lever. When
the rig is new, get accustomed to the feel of each mechanism so that you can determine if one needs
attention later. The ideal adjustment will not allow the dovetail to slide, even with the heaviest camera, but
remains easy to close fully.
Begin with the dovetail installed,
and the clamp lever closed.
Use a 7/64” Allen wrench to loosen
the lock screw approximately one-
half turn.
Turn the adjustment wheel to dial
in the tension. Turn clockwise
to tighten, counterclockwise to
loosen. Make small adjustments.
Re-tighten the lock screw before
testing the clamp.
Test to see if the dovetail clamp
holds firmly by trying to move the
dovetail plate with your hands.
Test the clamp lever movement.
Repeat adjustment if necessary.
NOTE: Never mess with the small set screws along the sides of the stage!
Adjustments and maintenance