SmartSystem Matrix Sled Chimera (Gold Mount) - Manual (Page 28)

28
T
he new M-2 gimbal builds upon the M-1 gimbal design, and integrates the Volt pan encoder ring within
the gimbal body. This saves you precious gimbal height, and makes all M-2 gimbals even easier to
upgrade and service later. With compatibility in mind, the gimbal fits 1.75”, 1.58” and 1.5” post diameters.
Pan Bearing
Inside outer ring
Dust protected
Yoke
Volt compatible
Gimbal Grip
Knurled for positive feel
Removable Gimbal Handle
Comfortable ergonomic design
Swappable
Clamp Lever
Over-center, tools free lock
Shown here closed
Arm Post Receiver
With holes for Tiffen or PRO low-mode bracket pins
Adapts from 3/4” to 5/8” arm posts with included insert
Optional insert for 1/2” posts: 888-7139-01
Volt Pan Encoder Ring
Inside, atop pan bearing
Lower total height
NOTE: The gimbal section of this user guide covers product numbers M2-GIM, and M2-GIMV. For product numbers M1-GIM, and
M1-GIMV, refer to the original M-1 manual (LIT-815000.)
Gimbal components