SmartSystem Matrix Sled Chimera (Gold Mount) - Manual (Page 33)

33
W
ith the pan bearing removed, spend an adequate amount of time to carefully clean out any
contaminants within the bearing. Warning: our recommended solvent is 100% acetone, so take the
necessary precautions to keep it off of sensitive items (such as paint, plastic and skin) and always follow the
manufacturer’s safety recommendations. 100% acetone is commonly available as a beauty supply.
OPTION: Use an ultrasonic cleaner (commonly used for cleaning jewelry) and manufacturer recommended
solutions and cleaning practices.
IMPORTANT: Never spin a dry bearing! Doing so without lubricant can score the internals and lead to increased friction. Be patient
and wait until you have applied oil before turning the pan bearing. It’s not a fidget spinner, after all.
• In a glass container, add 100% acetone until the
pan bearing is completely submerged.
• Soak for 10 minutes then gently agitate the
acetone to release any contamination in the
bearing.
• Resist the temptation to spin the bearing once
you’ve washed away any lubricant!
• Drain and refill the container with fresh acetone
and repeat until no more contaminants can be
seen in the fluid.
• When the bearing is completely clean, let it air
dry for a few minutes. DO NOT use compressed
air to blow off excess acetone or dry bearings.
• Add 5 to 10 drops of Tiffen bearing oil (888-
7116) on the bearing balls and slowly turn the
bearing to distribute the oil.
• The pan bearing is now ready for install.
• Clean the other gimbal parts with a lint free rag
and a small amount of acetone as needed.
• Please dispose of acetone in an environmentally
conscious manner, or reuse it to clean less-
sensitive items!