SmartSystem Matrix Sled Chimera (Gold Mount) - Manual (Page 3)

4 Evolution of the Steadicam M-Series
5 Steadicam modular components map
6 Stage components
7 Inputs and outputs
8 Camera dovetail clamp
10 Balance drives
11 Tilt stage
12 Volt system operation
16 Adjustments and maintenance
18 Installing Volt electronics
19 Installing or moving Volt control boxes
22 Post components
23 Post lock adjustment
24 Separating and connecting modular parts
28 Gimbal components
29 Gimbal with Volt components
30 M-2 Volt compared to M-1 Volt
31 Gimbal clamp adjustment
32 Pan bearing removal and cleaning
34 Pan bearing replacement
36 Monitor mount components
37 Monitor mount positioning
38 Clamp operation
39 Monitor yoke adjustment
40 Adjusting monitor clamps and hinge brakes
42 Base and battery mount components
43 Base electronics
44 Battery positioning
45 Installing the 3 rd battery mount
46 Three batteries, three switches
48 Connector diagrams and warnings
49 M-1 and M-2 features and specs
50 M-1 and M-2 part numbers
52 M-1 and M-2 accessories list
54 Contact Tiffen
TIP: This table of contents is hyperlinked to navigate you through the respective pages.
Jump back to this page by clicking on any page number throughout the manual. Easy.
The Tiffen Company
90 Oser Avenue
Hauppauge, NY 11788
Visit us at Tiffen.com
Table of contents