SmartSystem Matrix Sled Chimera (Gold Mount) - Manual (Page 48)

48
Warnings:
• When mounting “sandwiched” accessories to a battery mount with a battery on its back, in 24Volt mode,
do so ONLY on the REAR #1 battery mount. Mounting it to the front #2 battery mount (closest to the post
when upright) will damage the equipment in 24V mode. In 12V mode, any battery mount is safe.
• The 12 volt and 24 volt outputs on the M-2 are not regulated, so your actual voltage will be battery
voltage. This is typically around 14.4V, and 29V respectively.
Pin2 Pin1 Pin12 Pin12 Pin1 Pin2
Connector diagrams and warnings