Stage components – SmartSystem Matrix Sled Chimera (Gold Mount) User Manual
Page 6
NOTE:
The stage section of this user guide covers product numbers M2-TSF, M2-TSFV, M2-TST, and M2-TSTV. For product numbers
M1-TSF, and M1-TST, refer to the original M-1 manual (LIT-815000.)
Dovetail Plate
Maximum rigidity and mounting options
Index marks for repeatability
M-1/Ultra compatible
Front Electronics
Power, Volt and tally ports
Volt Switch Box
For optional VOLT electronics
Power, pause and trim control with LEDs
Swappable with Dial Box
Balance Drive Knobs
Side-side and fore-aft adjustment
Clamp Lever
Safety latch design with drop-in loading
Adjustable tension
Accessory Rod Mounts
LWS 15mm by 60mm spacing
For Steadicam accessories and custom applications
Dovetail Plate Extras
Glow-in-the-dark bubble level
Safety stops
Rear Electronics
High-definition video connectors
Power ports
Optional Tilt Stage
Tilt up or down 10˚
Dual locks ensure rigidity
Index marks for repeatability
Volt Dial Box
Tilt, roll and damping adjusters
Swap sides to face operator
Balance Drive Knobs
Fore-aft and side-side adjustment
Stage Connector
Modular mechanical and electronics junction
Compatible with M-1 and M-2 posts
Indexed for exact alignment
Stage components