Panasonic KX-TD500 - Manual (Page 124)

Group
124 Programming Guide
Trunk Group Copy
Used to copy a part of or all settings of a certain Trunk Group to all other Trunk Groups at a
time. You can also specify one or several Trunk Groups as the copy destination.
Copying the Trunk Group Parameters to Other Trunk Groups
1. Edit the parameters of the copy source Trunk Group and save it.
2. Point to the "Copy" button on "3-1 Trunk Group" screen of the copy source and click.
• "Trunk Group Copy" screen is displayed.
• The current Trunk Group (copy source) number is shown as "Copy from Trunk Group
1-48."
3. Select the Trunk Group parameters to copy in "Copy Item" field.
• Items marked with " " are copied.
4. Point to the "Select All" button in the "Destination Trunk Group" field and click.
• All displayed Trunk Group Nos. will be marked with " ."
• You can also specify one or several Trunk Groups as the copy destination by clicking it
(them) directly.
5. Point to the "Execute" button and click.
• "Are you sure?" is displayed.
6. Point to the "Yes (Y)" button and click.
• "Copying" is displayed while the source data is being copied to the destination.
• Parameters of the destination Trunk Groups are immediately effective when copying is
finished.