Panasonic KX-TD500 - Manual (Page 46)

System
46 Programming Guide
Parameter System Speed Dialing Entries Max.
Default Tenant No. 1:1000, Tenant No. 2:1000, Tenant Nos. 3-8:0
Value Range 0-1000 in 20 codes increments
Description/Function Specifies the maximum number of Speed Dialling codes available
for each tenant.
Note
• Up to 2000 Speed Dialling codes can be shared among
tenants under the restriction of up to 1000 codes per tenant.
Reference • 5.2 System Speed Dialling (P/G)
Parameter Automatic Route Selection
Default No check
Value Range 1. Check [Enable]
2. No check [Disable]
Description/Function Specifies whether to utilise ARS (Automatic Route Selection) or
not. If set to "No" (No check), "Trunk Access, Idle" is activated
instead of ARS when an extension user dials "9: [SA]" or "0:
Others" for making an outside call.
Reference • 1.6 Originating Features (F/G)
– Automatic Route Selection (ARS)
• 7.1 ARS (Automatic Route Selection) (P/G)
Parameter External Paging Tone
Default Check
Value Range 1. Check [Enable]
2. No check [Disable]
Description/Function If checked, a confirmation tone is emitted from external pagers
before voice announcement.
Reference • 1.14 Paging Features (F/G)
– Paging
• 2.6.1 Paging (U/M)