Panasonic KX-TD500 - Manual (Page 367)

Default Values
Programming Guide 367
2.8.2 System Option 2
2.8.3 System Option 3
5. Limited call duration Both calls
6. Transfer recall destination Originating extension
7. Checking dial *, # by toll restriction Check
8. Confirmation tone for Override, Barge-in,
Conference and Privacy Release
Enable
9. Confirmation tone for Call Pickup, Paging,
Paging-
Answer, TAFAS-Answer, Hold
Retrieve and Call Park Retrieve
Enable
10. Station Speed Dialing Initial display Name
Programme Default
11. Sending pulse signal during CO call Enable
12. Automatic adjustment of the clock using
Caller ID information
No
13. DISA prolong operation No limit
14. Dialing "*" in DISA CO-to-CO talking Disconnect and make a new call
15. Special dial tone after setting feature Enable
16. Duration starting mode Answer or Time-out
17. Destination Busy - DISA Send busy tone
18. Destination Busy - DDI / DID Send busy tone
19. Destination Busy - TIE Send busy tone
20. Off-hook Monitor Enable
Programme Default
21. Illegal Number - DISA Send reorder tone
22. Illegal Number - DDI / DID Send reorder tone
23. Illegal Number - TIE Send reorder tone
24. Sending dial tone to TIE trunk Disable
25. Pressing DSS key operation in CO talking Hold
Programme Default