Panasonic KX-TD500 - Manual (Page 201)

Line
Programming Guide 201
Parameter Key Type
Default CO-01: Loop-CO, Others: Not Stored
Value Range Please refer to "Description / Function."
Description/Function Not Stored: Key Type is not assigned.
SINGLE-CO: Single-CO button
GROUP-CO: Group-CO button
LOOP-CO: Loop-CO button
DSS: Direct Station Selection button
PHANTOM: Phantom button
PDN: Primary Directory Number button
SDN: Secondary Directory Number button
ONE-TOUCH: One-Touch Dial button
MESSAGE: Message Waiting button
FWD / DND: Call Forwarding / Do Not Disturb button
G-FWD: Group Call Forwarding button
SAVE: Saved Number Redial button
ACCOUNT: Account Code entry button
CONF: Conference button
VTR: Voice Mail Transfer button
LOGIN / LOGOUT: Login / Logout button
G-LOGIN / LOGOUT: Group Login / Logout button
2WAY-REC: Two-way Recording button
2WAY-TRN: Two-way Transfer button
LCS: Live Call Screening button
LCS CANCEL: Live Call Screening Cancel button
DAY / NIGHT: Day / Night switching button
ALARM: Alarm button
ANSWER: Answer button
RELEASE: Release button
TONE THROUGH: Tone Through button
SS: ISDN Service button
ALERT: Alert button
Notes
• SS (ISDN Service) button is used for "ISDN Network
Service Access" feature (Please refer to Section "2.2 ISDN
Originating Features" in the Features Guide). This service
may not work properly, if your ISDN Service carrier does not
support this service.
• The KX-TD500 System is designed and manufactured in
accordance with the following ETS (European
Telecommunication Standard) specifications: ETS 300 122
Generic Keypad protocol for the support of
supplementary services.
Reference •4.1.2 Customising the Buttons (U/M)