Panasonic KX-TD500 - Manual (Page 277)

Features
Programming Guide 277
Parameter [Charge Verification ID Code] Tenant 1-8
Default 1234
Value Range 4-7 digits consisting of 0-9
Description/Function Specifies the ID code required for the charge management.
When "Tenant Service" is employed, the password for each tenant
(Tenant 1 to 8) can be assigned respectively.
Reference • 1.3 System Features (F/G)
– Tenant Service
• 4.2 Charge Fee Management (Station Programming) (U/M)
• 2.2 Tenant (P/G)
Parameter Rate
Default 1.0
Value Range 0.00001-999999
Description/Function Specifies the charge rate per metre.
Notes
• The telephone charge is calculated by multiplying the value
of "Rate" and the metre (the number of Pay Tones sent from
the Central Office).
• Telephone charge is shown on a display PT in a max. 8 digits
(including the '.' [decimal point] ) format.
Reference • 4.2 Charge Fee Management (Station Programming) (U/M)
Parameter Currency
Default $
Value Range Up to 2 characters consisting of 0-9, A-Z, a-z or the following
marks: ! # $ %
( ) + , - / : ; < = > ? @ &.
Description/Function Specifies the currency appropriate to your country/area.
Reference None