Panasonic KX-TD500 - Manual (Page 30)

Configuration
30 Programming Guide
Parameter Receiver Type
Default Undefined
Value Range 1. Undefined
2. Pulse
3. DTMF
4. MFC-R2
Description/Function Specifies the dial type when receiving an incoming call.
1. Undefined: Not assigned.
2. Pulse: DP Signalling sending / receiving
3. DTMF: DTMF Signalling sending / receiving
4. MFC-R2: MFC-R2 Signalling sending / receiving
(Digital signalling system-R2 only)
Reference None
Parameter Status
Default —
Value Range 1. INS
2. OUS
3. FAULT
Description/Function Specifies the operating status of the E1 port.
1. INS: The E1 port is In-Service.
2. OUS: The E1 port is Out-of-Service.
3. FAULT: The E1 port is defective (hardware).
In this case, the LED indicator on the E1 card will light.
Reference None