Panasonic KX-TD500 - Manual (Page 177)

Line
Programming Guide 177
Parameter Collect Call
Default Enable
Value Range 1. Enable
2. Disable
Description/Function Specifies whether to enable or disable receiving the collect calls via
this trunk line.
(Assignable only when E1 [DR2] / ELCOT / LCOT / RCOT /
PCOT / DID / DID-2W / DID-MFC card is installed in the system.)
Reference None
Parameter Wink Signal Time-out
Default 1024 ms
Value Range 1. 64 ms
2. 128 ms
3. 256 ms
4. 512 ms
5. 1024 ms
6. 2048 ms
7. 4096 ms
8. 8128 ms
Description/Function Specifies the length of time in milliseconds that the system is to
wait for the Wink Signal after seizing the trunk.
(Assignable only when "Start Signal Type" is set to "Wink"; the
case of the E&M card is excluded.)
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service