Panasonic KX-TD500 User Manual
Page 14
Configuration
14
Programming Guide
Parameter
Attribute
Default
TEL
Value Range
1.
TEL
2.
DSS
3.
VPS (DPT)
4.
PC Console
Description/Function
Specifies the attribute of the terminal which is to be connected to
the extension port.
1.
TEL
Select this option when you connect a telephone set to the
extension port.
2.
DSS
Select this option when you connect a DSS console to the
extension port.
3.
VPS (DPT)
Select this option when a port of Panasonic Voice Processing
System (one that supports DPT Integration) is connected to the
extension port.
4.
PC Console
Select this option when you connect a PC Console to the
extension port.
A PC Console can be connected to a DHLC card (port 1 only)
or a DLC card (port 1 and 9 only).
Notes
•
"DPT integration (except TVP300)" does not function
unless the VPS is connected to a DLC or DHLC card
whose LPR Version (ROM Version) is 1 or later.
•
A PC Console and "DPT integration (TVP300 only)" do
not function unless it is connected to a DLC or DHLC
card whose LPR Version (ROM Version) is 2 or later.
•
You can confirm the LPR Version (ROM Version) of the
DLC and the DHLC card in "Card Properties" screen for
each card. For information on "Card Properties" screen,
please refer to "Card Type" in Section "1.2 Slot
Assignment."
•
There is a limit of 8 VPS (DPT) ports per card.
•
There is a limit of 16 VPS (DPT) ports per shelf.
Reference
• 1.5
VPS (DPT) Port Assignment (P/G)
• 4.3
Extension Line (P/G)
• 4.4
DSS Console (P/G)
• 4.8
PC Console Line (P/G)