Panasonic KX-TD500 - Manual (Page 56)

System
56 Programming Guide
Parameter 38 External Feature Access
Default 6
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for sending a switchhook flash to a
host PBX or Centrex system. This is useful when the host PBX
offers, for example, "Call Waiting" call.
Reference • 2.8.2 If a Host PBX is Connected (U/M)
Parameter 39 Station Program Clear
Default 790
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for Station Programme Clear.
Reference • 2.7.14 Clearing the Feature Settings at Your Extension (Station
Programme Clear) (U/M)
Parameter 40 Message Waiting Set / Cancel / Call Back
Default 70
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for setting / cancelling the Message
Waiting indications.
This is also used to call back the party who left a Message Waiting
indication.
Reference • 2.2.4 When the Dialled Line is Busy or There is No Answer (U/
M)
Parameter 41 OGM Playback / Record
Default 36
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for recording / playing back an OGM
(Outgoing Message). [For Manager, Operator only]
Reference • 3.2.2 Recording Outgoing Messages (U/M)