Panasonic KX-TD500 - Manual (Page 220)

Line
220 Programming Guide
Parameter Group No.
Default (Display only)
Value Range 1-128
Description/Function Displays the Extension Group to which the selected ISDN
extension port is assigned.
Reference • 1.9 BRI Port Assignment (P/G)
Parameter Name
Default Blank
Value Range Up to 10 characters consisting of 0-9, A-Z, a-z or the following
marks: ! # $ %
( ) + , - / : ; < = > ? @ &.
Description/Function Specifies the name for the ISDN extension line.
Reference • 1.17 Display Features (F/G)
– Display, Call Information
Parameter Charge Limit
Default 0
Value Range 0: No limit
1-99999: The number of charge metre allowable for the ISDN
extension
Description/Function Used to determine the sum total of telephone charge allowable to
extension users on an ISDN extension basis. If the telephone charge
on the ISDN extension exceeds the limit, a toll call cannot be made
anymore from that extension.
Note
• If the charge limit is set to "0," no restriction is applied.
Reference •4.2 Charge Fee Management (Station Programming) (U/M)
Parameter Tone
Default Disable
Value Range 1. Enable
2. Disable
Description/Function Specifies whether the system sends the call progress tone to the
ISDN extension or not.
Reference None