Panasonic KX-TD500 - Manual (Page 173)

Line
Programming Guide 173
Parameter Incoming Type
Description/Function <Available selections and the default values per Card Type>
<Default values for E1 card per Channel Type / Receiver
Type>
Note
• In some cases, the default cannot be changed.
Reference • 1.5 Attended Features (F/G)
– Direct In Lines (DIL)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
• 3.1 TIE Line Features (F/G)
– TIE Line Service
BRI
DID, DID-2W
DID-MFC
E1
LCOT, GCOT,
RCOT, PCOT,
ELCOT,
T1(LCO),
T1(GCO)
PRI23/PRI30
TIE/DDI/MSN
DID
DIL/DID/TIE
TIE/DDI
Card Type Selection Default
DID
DDI
TIE
DDI
DID/TIE
Refer to the
table below.
E&M, T1(TIE) DIL/TIE
DIL DIL
T1(DID) DIL/DID DID
(Refer to the table below.)
DR2
E&M-C
E&M-P MFC-R2
MFC-R2
Pulse
DTMF
Pulse
DTMF
Channel Type Receiver Type Selection Default
TIE
DID
DIL / TIE
DID
DID / TIE