Panasonic KX-TD500 - Manual (Page 295)

ARS (Automatic Route Selection)
Programming Guide 295
Parameter Dial
Default Blank
Value Range Up to 10 digits consisting of 0-9, , # or X
Description/Function Specifies the leading 10 digits of the telephone number which will
be routed by ARS procedure.
Note
• "X" can be used as a wild card character which substitutes
any digit in its position.
(Example 1.)
Leading Digits: 1800
ARS Plan 1
Leading Digits: 1 ARS Plan 2
If the user-dialled number is "1800," the system selects ARS
Plan 1.
(Example 2.)
Leading Digits: 1800
ARS Plan 1
Leading Digits: 1 ARS Plan 2
If the user-dialled number is "1800," the system selects ARS
Plan 2.
Reference • 1.6 Originating Features (F/G)
– Automatic Route Selection (ARS)
Parameter Routing Plan No.
Default None
Value Range None, 1-48
Description/Function Specifies the Routing Plan (1 - 48) which is used for routing the
telephone number registered in "Dial" field above.
Reference • 1.6 Originating Features (F/G)
– Automatic Route Selection (ARS)