Panasonic KX-TD500 - Manual (Page 45)

System
Programming Guide 45
Parameter Music on Hold Source
Default MUS1
Value Range 1. None
2. MUS1
3. MUS2
4. Tone
Description/Function Specifies the Music Source port to be used for Music on Hold.
Note
• If "MUS2" is selected, the actual source depends upon the
position of the switch located on the TSW card. "MUS2
(Music 2 jack)" or "INT MUS (internal music)" can be
selected by this switch.
Reference • 1.3 System Features (F/G)
– Music on Hold
• 2.8.3 Music Source (External / Internal) (I/M)
Parameter BGM Source
Default MUS1
Value Range 1. None
2. MUS1
3. MUS2
Description/Function Specifies the Music Source port to be used for BGM.
Note
• If "MUS2" is selected, the actual source depends upon the
position of the switch located on the TSW card. "MUS2
(Music 2 jack)" or "INT MUS (internal music)" can be
selected by this switch.
Reference • 2.8.3 Music Source (External / Internal) (I/M)
Parameter Manager Extension DN
Default Blank
Value Range 3-4 digits consisting of 0-9
Description/Function Specifies the extension for the Manager.
Reference • 1.3 System Features (F/G)
–Manager Extension
• 3 Operator/Manager Operation (U/M)