Panasonic KX-TD500 - Manual (Page 51)

System
Programming Guide 51
Parameter 11-16 11th Hundred Block Extension - 16th Hundred Block
Extension
Default Blank
Value Range 1-2 digits consisting of 0-9
Description/Function Same as the Parameter 1.
Reference • 1.3 System Features (F/G)
– Flexible Numbering
Parameter 17 Operator Call
Default 9: [SA], 0: Others
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for calling the Operator.
FDN for each Operator Group can also be used for this purpose.
Reference • 2.2.1 Basic Calling (U/M)
Parameter 18 Local CO Line Access / ARS
Default 0: [SA], 9: Others
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for making an outside call by "ARS
(Automatic Route Selection)" or "Trunk Access, Idle."
Reference • 2.2.1 Basic Calling (U/M)
Parameter 19 Trunk Group Access
Default 8
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for making an outside call by
specifying a Trunk Group (01-48).
Reference • 2.2.1 Basic Calling (U/M)