Installation, Converting a tabletop model to a rackmount model, 2 installation – HP MSL6000 Series User Manual
Page 29: 2installation
Advertising
MSL6000 series tape library user guide
29
2
Installation
This chapter explains how to install an HP StorageWorks MSL Series tape library. Sections in this
chapter include:
• Converting a Tabletop Model to a Rackmount Model
• Setting Up the Rackmount Model
• Converting a Rackmount Model to a Tabletop Model
• Applying Power to the Library
• Cabling for SCSI Configurations
NOTE:
Be sure to keep and store all shipping materials from your MSL Series tape library for
potential future use.
Converting a Tabletop Model to a Rackmount Model
To make a tabletop library ready for rack enclosure installation:
1.
Remove the rubber feet.
2.
Remove the cover.
3.
Attach the inner rails to the library using the supplied Allen wrench and screws. Tighten the
screws until snug.
Advertising
This manual is related to the following products: