Factory, Security level, Figure 58 security level screen – HP MSL6000 Series User Manual
Page 72: Inserting and removing tape cartridges, 58 security level screen
Operation
72
NOTE:
The Vertical Calibration button is only available on four-drive models.
Factory
The Factory menu options are intended for use by factory personnel only.
CAUTION:
Unauthorized use of the Factory option could render the library inoperable.
Security Level
Selecting this option lets you select passwords for a security level (see
).
NOTE:
The library ships with a default Service password of 5566.
NOTE:
Setting a value 0000 for a given level disables that level.
Figure 58
Security level screen
Inserting and Removing Tape Cartridges
Unless you are using the mail slot(s), a tape magazine must be removed from the library to remove
or insert tape cartridges. Make sure the slot you want to use is not already reserved for a tape
cartridge or cleaning cartridge that is now in a tape drive. The safest way to do this is to unload all
tape drives before removing a magazine. You can unload all the tape drives either through your
host system software or by using the LOAD/UNLOAD command from the Library Option menu.