HP MSL6000 Series - Manual (Page 40)

Library Configuration 40
Figure 20 SCSI option selection screen (two-drive model shown)
NOTE: You can move to the next sequential SCSI options screen by touching the T.
For example, to set the Drive 0 Bus ID to 3:
a. Select the box next to the text “Drive 0 Bus ID:.” The resulting screen (see
Figure 21 ) displays
the current Drive 0 Bus ID along with the new value that you request.
Figure 21 Drive 0 bus ID screen
b. Touch the block that contains the number 3. This places your request into the New data
field.
c. Touch the Save option to confirm your request. A confirmation screen is displayed (see
Figure 22 ).