HP MSL6000 Series - Manual (Page 77)

MSL6000 series tape library user guide 77
To ensure successful operation of your tape library, place the bar code label entirely within the
recessed area, ensuring that no part of the label is outside of it (see Figure 63 ).
Figure 63 Proper Ultrium bar code label placement
SDLT Labels
SDLT tape cartridges have a front slide slot located on the face of the cartridge next to the
write-protect switch (see Figure 64 shows) Use this slot for inserting the bar code label by sliding it
into the slot.
CAUTION: Do not apply labels onto the top, bottom, sides, or back of the cartridge as this may
cause damage to the tape drive, or interfere with reliable operation.