Host system, Library display screens and options, Initialization screen – HP MSL6000 Series User Manual
Page 53: Figure 38 initialization screen, Library status screen, 38 initialization screen
MSL6000 series tape library user guide
53
Host System
Media can also be reserved by software running on the host. The library provides no GUI touch
screen override for this command. Usually, exiting the host software restores media access. In the
event of host failure, you can restore media access by cycling the library power.
Library Display Screens and Options
The library GUI touch screen displays graphics and text characters in the form of easy-to-understand
messages. Graphics and text messages, along with their functions, are described in this section.
Initialization Screen
When power is first applied to the library, a series of Power-On Self Test (POST) diagnostics are
performed. After the POST completes, the following initialization screen appears during the library
inventory and scalability configuration.
Figure 38
Initialization screen
Library Status Screen
After the POST executes successfully and the library initialization completes (approximately 45
seconds), the following library Status screen appears (see
):
1
Technical Support Information (HP logo)
2
LCD Contrast Controls (reset and power-up)