Hitachi SJ700-2 Series - Manual (Page 27)

1 - 23
1.3.2 Example of operation in full display mode ("b037" = "00")
All parameters can be displayed in full display mode. The display sequence of parameters matches
their sequence shown in Chapter 8, "List of Data Settings."
Pressing the or key respectively scrolls up or down the code displayed in code display mode or
increases or decreases the numerical data displayed in data display mode.
Press the or key until the desired code or numerical data is shown. To scroll codes or
increase/decrease numerical data fast, press and hold the key.
*1 The content of the display varies depending on the
parameter type.
*2 To update numerical data, be sure to press the
key after changing the data.
Key operation and
transition of codes on
display (in monitor or
function mode)
Key operation and
transition of monitored
data on display (in monitor
or function mode)
Key operation and
transition of codes on
display (in extended
function mode)
Key operation and
transition of monitored
data on display (in
extended function mode)
1 2
1 2
FUNC
Monitor
mode
(Monitor
display)
(*1)
(Data display)
(*1) (*2)
Function
mode
or FUNC STR
FUNC
FUNC
FUNC
FUNC
FUNC
or FUNC STR
or FUNC STR
or FUNC STR
or FUNC STR
or FUNC STR
or FUNC STR
or FUNC STR
FUNC
Extended
function
mode A
For the display and key
operation in extended
function mode U, see the
next page.
(*1) (*2)
(Data display)
Extended
function
mode B
Extended
function
mode C
Extended
function
mode H
Extended
function
mode P
or FUNC STR
FUNC
STR
FUNC