Hitachi SJ700-2 Series - Manual (Page 28)

1 - 24
1.3.3 Code/data display and key operation in extended function mode U
The extended function mode U differs in operation from other extended function modes because the
extended function mode U is used to register (or automatically record) other extended-function codes
as user-specified U parameters.
*1 The content of the display varies depending on the
parameter type.
*2 To update numerical data, be sure to press the
key after changing the data.
Key operation and
transition of codes on
display (in monitor or
function mode)
Key operation and
transition of codes on
display (in extended
function mode U)
Key operation and transition
of codes on display (when
displaying extended-function
mode parameters from the
extended function mode U)
Key operation and
transition of codes on
display (in monitor,
function, or extended
STR
(*1) (*2)
(Data display)
Extended
function
mode A
Extended
function
mode B
Extended
function
mode C
Extended
function
mode H
Extended
function
mode P
Monitor
mode
Function
mode
Pressing the key
reflects the value set here in
the corresponding parameter.
Note that the value is not
reflected in the corresponding
U parameter.
Extended
function
mode U
Pressing the key
stores the value set here
in the corresponding U
parameter.
You cannot restore the
display with the
key.
(Display with the
factory setting)
FUNC
or FUNC STR
FUNC
or
FUNC STR
FUNC
FUNC
STR
STR
STR