MITSUBISHI ELECTRIC MR-J2S- A - Manual (Page 93)

3 - 46
3. SIGNALS AND WIRING
(7) Source input interface
When using the input interface of source type, all Dl-1 input signals are of source type. Source output
cannot be provided.
For use of internal power supply For use of external power supply
SG
COM
24VDC
VDD
TR
R: Approx. 4.7
SON,
etc.
(Note)
For a transistor
Approx. 5mA
V
CES
1.0V
I
CEO
100 A
Switch
Servo amplifier
SG
COM
24VDC
200mA or more
R: Approx. 4.7
SON,etc.
Switch
Servo amplifier
Note. This also applies to the use of the external power supply.
When using the input interface of source type, all Dl-1 input signals are of source type. Source output
cannot be provided.
For 11kW or more, the source input interface cannot be used with the internal power supply. Always
use the external power supply.
CON2
MITSUBISHI
JP11
CON2 CON2
JP11 JP11
For sink input (factory setting) For source input
(Note) (Note)
Jumper Jumper
Note. The jumper, which is shown black for the convenience of explanation, is actually white.