Measurement Specialties 9116 - Manual (Page 16)

Pressure Systems, Inc. Model 9116 User’s Manual
Page 7 www.PressureSystems.com
Chapter 2
Installation and Set Up
2.1
Unpacking and Inspection
The NetScanner
™ System product family has many components which may be purchased
either as an entire system, or as individual pieces of equipment. Before assembling the system,
use the shipping bill as a reference to ensure that all parts have arrived. Pressure Systems
takes no responsibility for equipment that is damaged during shipment. If containers are
broken, ripped, or damaged, contact the transportation carrier. If the equipment itself appears
to be damaged, contact the Repair Department at Pressure Systems.
Each Model 9116 Intelligent Pressure Scanner shipment will contain the following minimum
components:
• Model 9116 Intelligent Pressure Scanner module
• Start-up software CD-ROM
• Model 9116 User’s Manual for Intelligent Pressure Scanners CD-ROM
2.2 Safety Considerations
It is always a good idea to wear safety glasses when operating this equipment or when working
with pressurized lines. Always ensure that high pressure lines are properly secured and that all
pneumatic lines are rated for the proper pressure and temperature environments.
All system power should be OFF during installation (or removal) of any components in a
NetScanner
™ System module. Failure to turn power OFF prior to installation may cause
permanent damage to the module. Use caution and check line voltages before applying power
to the module.
2.3 Preparation for Use
2.3.1 Environment
All standard Intelligent Pressure Scanners are factory calibrated to be accurate over a specified
temperature range, but may be operated or stored over a wider temperature range (see
Environmental/Physical Specifications in the Model 9116 Data Sheet. Operating or storing
an instrument outside its specified range(s) will result in a loss of measurement accuracy and
may cause permanent damage to the instrument electronics.