Measurement Specialties 9116 - Manual (Page 37)

Pressure Systems, Inc. Model 9116 User’s Manual
Page 28 www.PressureSystems.com
3.2 Detailed Command Description Reference
All commands applicable to the Model 9116 Intelligent Pressure Scanner modules are
described on the following pages. They are summarized in the following table. For
convenience, this table is also repeated in Appendix B.
TYPE COMMAND ID COMMAND FUNCTIONS
A Power-Up Clear
B Reset
C
Configure/Control Multi-Point Calibration
(4 sub-commands)
V Read Transducer Voltages
Z Calculate and Set Gains (Span Cal)
a Read Transducer Raw A/D Counts
b Acquire High Speed Data
c
Define/Control Autonomous Host Streams
(6 sub-commands)
h Calculate and Set Offsets (Re-zero Cal)
m Read Temperature A/D Counts
n Read Temperature Voltage
q Read Module Status
r Read High Precision Data
t Read Transducer Temperature
u Read Internal Coefficients
v Download Internal Coefficients
TCP/IP
Commands
w Set/Do Operating Options/Functions
psi9000 Query Network
psireboot Reboot Specified Module
UDP/IP
Commands
psirarp
Change Specified Module’s IP Address
Resolution Method (then Reboot)