Muratec Fax Machine - Manual (Page 111)

Advanced fax
9 Use the numeric keypad to enter the appropri-
ate
ITU - T password for the box.
Note: If there isn’t a ITU - T password for this
box, skip to step 10.
10 Press [Enter].
11 If you want the F-Code polling to begin immedi-
ately every time you press the key, press [Exit] and skip to step 14.
If you want to delay the F-Code polling, select “Delayed Tx” and press
[Enter].
12 Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a
certain time on a certain day of
the month. (For example, “Do this
at 5:05
PM on the 30th.”)
To select this option, use the
numeric keypad to enter the date
and time when the fax should
perform the command.
Option 2: Perform the command at a cer-
tain time each day you press the
key. (For example, “Do this at 5:05
PM today.”)
To select this option, use the
numeric keypad to enter 0, 0 and
then the time the fax should per-
form the command.
13 Press [Enter], [Exit].
14 The machine will return to step 2.
Note: When the F-Code transmission is programmed, the symbol will
appear in the programmable one-touch number list on the LCD .
Note: When the delayed transmission is programmed, the symbol will
appear in the programmable one-touch number list on the LCD .
If you want to enter or change another key’s programming, repeat steps 2-14.
If you do not want to enter or change any other key’s programming, press
RESET . Your machine returns to standby mode.
Erasing a programmable one-touch key
1 Press MENU , C , [Enter].
The LCD shows the programmable one-touch number list.
2 Select the programmable one-touch key which you want to erase.
Note: You can select the programmable one-touch key by pressing that key
on the control panel.
Note: You can press [Detail] to see the number which has been pro-
grammed in that key.
3 Press [Erase]. The LCD shows:
Important: If you want to quit without eras-
ing the one-touch number you’ve
selected, press [Cancel]. The fax
will return to step 2.
4 Press [Erase] to erase the programmable one-
touch number.
To erase another programmable one-touch number, repeat steps 2–4.
Or press
RESET to return to standby mode.
Printing a list of your programmable one-touch keys
You fax machine can print a list of the commands you’ve stored in your programma-
ble one-touch keys.
The list includes:
(1) each key’s one-touch number
(2) the fax/telephone number
(3) when the command should start
(4) which command you’ve selected
(5) if applicable, the selected call group(s) or F-Code box(es) you’ve stored in
the key
(6) the individual settings for each key
To print a list of programmable one-touch keys, press MENU , C , [List].
3.59
F
ax F
eatures
Getting Started