Muratec Fax Machine - Manual (Page 86)

Advanced fax
Fax & Copy
With the Fax & Copy feature turned on, your machine asks if you want to make a
copy of a document each time it transmits that document from memory.
Note: The Fax & Copy function cannot be used for non memory transmissions.
Note: Quick Memory transmission (see page 3.70) and the Fax & Copy function
cannot be used at the same time. If both are turned on, Quick Memory will
not work.
Note: The Fax & Copy feature will use the same resolution you set for the trans-
mission for the copy’s scanning resolution.
Using the Fax & Copy function
1 Place the document and select resolution and contrast you require.
Note: With this function, you cannot select Normal and Halftone resolution.
2 Enter MENU and select “Fax & Copy”.
3 Press [Enter].
4 Enter the fax number. Either press a one-touch
key, enter a speed-dial number, call group num-
ber or use the numeric keypad to enter the fax
number.
If you entered the fax number using a one-touch
key, skip to step 6.
Otherwise, go on to step 5.
5 Press START .
6 The LCD changes copy mode and asks the num-
ber of copies you want to make:
7 Use the numeric keypad to enter the number of
copies you want for each page in the document.
Choose from 01 to 99 copies.
Note: If you want to quit without transmit-
ting and copying the document, press STOP . The fax returns to
standby mode.
8 Press START to begin the transmission and copying process.
Polling
Polling allows someone to fax a document to you without having to make the call or
pay for it. There are several kinds of polling:
• Regular polling — Your fax retrieves a document from a remote fax machine.
• F-Code polling — Your fax retrieves a document stored as a file in the remote fax
machine. To do this, you must be communicating with another F-code-compatible
fax machine. For more information on F-Code polling, see “F-Code communication,”
pages 3.52–3.53.
• Continuous polling — Your fax continuously retrieves a document from any
remote fax machine at a designated time. For example, a hospital pharmacy can
use this to check on orders waiting in fax machines throughout the hospital.
For polling to work, the remote machine must also be set up to be polled. See the
remote machine’s operating instructions, if necessary.
Regular polling
To set up your machine for regular polling:
1 Make sure the document is inserted in the remote fax machine.
2 Press MENU and select “Polling” then press
[Enter]. The LCD shows (see right):
3 Enter the remote fax machine’s number by
either pressing a one-touch key, entering a
speed-dial number or using the numeric key-
pad.
4 To perform the regular polling now, skip to step
8.
To perform delayed regular polling, go on to step 5.
5 Press MENU and select “Delayed Tx” then
press [Enter]. The LCD shows (see right):
6 Use the numeric keypad to enter the date and
time (use the 24-hour format) when your
machine should perform the delayed regular
polling.
7 Press [Enter].
8 Press START .
3.34