Muratec Fax Machine - Manual (Page 88)

Advanced fax
Printing a stored polling document
To print a document you’ve stored for regular polling without erasing it,
press
MENU , D , [Enter], [PrintDoc].
Erasing a stored polling document
To erase a document you’ve stored for regular polling from your machine’s memory,
press
MENU , D , [Enter], [EraseDoc], [EraseDoc].
Limiting polling access to your fax machine
Your machine’s closed network setting (see page 3.65) works for polling, also. If a
calling fax doesn’t “present” the proper passcode, it cannot poll from your fax.
Note: If you’re using the Block Junk Fax feature (see pages 3.65), even incoming
calls which meet the passcode test must come from phone
numbers you’ve approved.
Transferring documents (Fax forwarding)
This feature tells your fax machine to receive documents and then transfer them
automatically to another fax machine. You can set the time period for which the fax
machine will continue this process.
Note: Fax forwarding will not transfer F-Code reception documents.
Note: Fax forwarding is not available with the Tel Ready mode.
Turning the Fax forwarding on or off
1 Press MENU , O [the letter O, not a zero],
[Setting].
2 Select ON or OFF using the cursor key.
3 Press [Enter].
Note: If you assign Fax Forward into a Soft Key,
you can toggle ON and OFF easily. (See page 4.1)
Create the transfer pattern
You can create up to five transfer patterns.
To set up transfer pattern:
1 Press MENU , O [the letter O, not a zero],
[Enter].
2 If you set up a transfer pattern at your first
time, skip to step 4.
If you have already set up any transfer pattern,
proceed to step 3.
3 Select the number you want to set up or
change.
4 Press [Enter]. The LCD shows (see right):
5 Enter the fax number for the remote fax to
which you want documents to be transferred.
Use either a one-touch number, a speed-dial
number, a call group or regular number dialed
from the numeric keypad.
If you are entering only one number for transferring, skip to step 7.
To add any additional fax numbers for this operation, proceed to step 6.
3.36