Muratec Fax Machine - Manual (Page 67)

Advanced fax
Inserting and deleting a one-touch number
You can insert a one-touch number without erasing any one-touch number already
stored. If you insert a one-touch number, other numbers will be shifted downward
automatically.
Also, you can delete a one-touch number and shift other numbers upward automati-
cally.
To insert a one-touch number:
1 Press MENU , A , [Enter].
The LCD shows the one-touch number list.
2 Select the one-touch key in which you want to
enter new number.
Note: You can select the one-touch key by
pressing that key on the control panel.
3 Press NEXT , [Insert].
4 The machine will ask you if you want to insert
an empty one-touch number at that place.
Important: If you want to quit without
inserting an empty one-touch
number at the place you’ve
selected, press [No]. The
machine will return to step 2.
5 Press [Yes].
6 The one-touch key you selected will be empty
and other numbers will be shifted downward.
7 Press [Enter].
8 Enter the fax number as described in step 4 on
page 3.12.
9 When the number is as you want it, press
[Enter] to store it.
10 Enter Location I . D ., Alternative number or Group number as described in
steps 7–15 on page 3.13.
Note: If you want to omit these settings, go to step 11.
11 Press [Exit].
Press RESET to finish.
To delete a one-touch number:
1 Press MENU , A , [Enter].
The LCD shows the one-touch number list.
2 Select the one-touch key you want to delete.
Note: You can select the one-touch key by
pressing that key on the control panel.
Note: You can press [Detail] to see the num-
ber which has been programmed in that
one-touch key.
3 Press NEXT , [Delete].
4 The machine will ask you if you want to delete
that one-touch number.
Important: If you want to quit without delet-
ing the one-touch number you’ve
selected, press [No]. The machine
will return to step 2.
5 Press [Yes].
6 The one-touch key you selected will be deleted
and other numbers will be shifted upward.
7 Press RESET to finish.
3.15
F
ax F
eatures
Getting Started