Muratec Fax Machine - Manual (Page 114)

Advanced fax
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine’s
memory and the
MEMORY RECEIVE light comes on. But the fax has not been printed.
To retrieve the faxes received during this security reception (and to return your
machine to normal reception until the next time):
1 Press MENU , M , [PrintDoc].
The LCD shows (see right):
2 Use the numeric keypad to enter the passcode.
3 Press [Enter].
• If you’ve entered the correct passcode, your
fax machine will print all documents in its
memory and then erase them. Then it will
turn security reception off until the next
time you’ve scheduled security reception.
• If you’ve entered an incorrect code, your fax machine will refuse to print,
and security reception remains on.
Masking the
PIN
To prevent unauthorized long-distance calls, some office telephone systems require
you to enter a personal identification number (
PIN ) whenever you dial long distance.
Your fax’s PIN mask feature helps you keep that PIN number private. With the PIN
mask activated, you can dial a fax number plus a PIN , but the PIN will not appear in
a journal, error message printout, delayed command list or a TCR . The PIN may be up
to eight characters in length. It also can include the * or # symbols, and it can be
entered from the numeric keypad.
There are three possible settings for the
PIN mask:
• Off — Turns off the PIN mask feature. Any PIN you enter will appear on any dis-
play or printout which shows the number you dial.
• Mode 1 — Each remote fax unit has a departmental PIN access code.
• Mode 2 — Each fax user has a departmental PIN access code.
Note: If you select Mode 1 and you will use a one-touch or speed-dial number, you
must store the remote unit’s PIN access code within that number. However, if
you select Mode 2, this isn’t necessary. (See “Autodialing while using the PIN
mask,” next page for further details.)
Note: If you select either Mode 1 or Mode 2 and will be using batch transmission
(see pages 3.26–3.28), you must store the PIN access code for the remote unit
within the appropriate batch box.
Activating the PIN mask
Important: For this feature to work, you must have activated the passcode protec-
tion as described on page 3.61. You must also know the passcode.
1 Press MENU , J , 1, 6, [Enter].
The LCD shows (see right):
2 Use the numeric keypad to enter the four-digit
passcode.
Note: If you enter an invalid passcode, the
machine’s security feature rejects the
attempt and returns to standby mode.
3 Press [Enter].
4 Select desired mode.
5 Press [Enter].
6 Press RESET to return to standby mode.
3.62