Muratec Fax Machine - Manual (Page 32)

Advanced Copy
To make copy with repeat:
1 Press MENU .
2 Select “Repeat” using the cursor key, and then
press [Enter].
Note: The Auto Reduce/Enlarge is selected
automatically.
3 Select the desired repeat modes using the cur-
sor key.
Note: The number of documents repeated can be 2, 4 or 8.
4 If you want to change the recording paper size for combining, proceed to next
step. Otherwise, skip to step 6.
5 Press [Paper] to select the paper size, and then press [Enter].
6 You can insert the separator lines between repeated images. If you want to
insert the separator lines, proceed to next step. Otherwise, skip to step 8.
7 Press NEXT and then press [Line] to print the
separator lines. To cancel the separator lines,
press [Line] again.
Note: The width of the line can be changed.
(See page 2.28.)
8 If you want to change the layout, proceed to next step. Otherwise, skip to step
12.
Note: Use this function, when you set the reduction/enlargement ratio by
yourself.
9 Press [Layout], the LCD will show:
Note: If [Layout] does not appear on the LCD ,
press NEXT until it appears.
10 Select the layout using the cursor key.
11 Press [Enter] to save the layout setting.
12 Press [Enter] to save the setting.
Note: If [Enter] does not appear on the LCD , press NEXT .
Note: To cancel the setting of the combine function, press CLEAR .
13 The Repeat icon will be displayed on the LCD .
14 Set the documents.
Note: Set the documents in the same direction as you see on the LCD in step
5.
If you set your documents in the ADF :
Press START . After all the documents in the ADF are scanned, the copies will be
printed.
If you set your document on FBS glass:
Press START after setting the first page of your documents on the FBS glass.
Then set the next page of your document, then press [Start].
After all your documents are scanned, press [Exit].
2.12