Muratec Fax Machine - Manual (Page 94)

Advanced fax
OneLine + distinctive ring detection
Many phone companies now offer their customers a special service which makes it
possible for one phone line to do the work of two.
With this service, you physically still have one phone line, but, electronically, you
have two phone numbers. Your phone recognizes these different numbers and rings
differently for each one.
For example, this makes it easy for you to have both a business number and a home
number on one phone line, so you can answer one with “Jane Doe Consulting,” and
the other with “Hello.” This works because you can tell the difference between the
distinctive patterns of the two rings.
Your fax machine is also smart enough to tell the difference between two different
numbers that are ringing it. All you have to do is set up your machine for the
OneLine + distinctive ring detection (
DRD ) feature.
In order to use OneLine + DRD , your phone company must set up your distinctive
ring service. When it does, it will assign a ring pattern. For example, the standard
telephone ring is 2 seconds “on” (ringing) and 4 seconds “off” (silent), after which it
repeats itself.
Your fax has eight possible distinctive ring patterns for use with OneLine +
DRD .
One of them should work with your phone company’s DRD service. This chart lists
the patterns:
Pattern One complete ring pattern (seconds)
A 0.8 on, 0.4 off, 0.8 on, 4.0 off
B 0.4 on, 0.2 off, 0.4 on, 0.2 off, 0.8 on, 4.0 off
C 0.3 on, 0.2 off, 1.0 on, 0.2 off, 0.3 on, 4.0 off
D 1.0 on, 0.5 off, 1.0 on, 3.5 off
E 0.5 on, 0.5 off, 0.5 on, 0.5 off, 1.0 on, 3.0 off
F 0.5 on, 0.5 off, 1.0 on, 0.5 off, 0.5 on, 3.0 off
G 0.4 on, 0.6 off, 0.4 on, 4.6 off
H 1.5 on, 0.5 off, 0.5 on, 3.5 off
For example: pattern C is 0.3 seconds ringing, 0.2 seconds silent, 1 second ringing,
0.2 seconds silent, 0.3 seconds ringing and 4 seconds silent. Then it goes back to the
first 0.3-second ring and starts over.
To use
DRD on your fax machine:
1 Contact your phone company to make sure it has set up DRD service for you. If
possible, also find out which distinctive ring pattern the phone company has
assigned you.
2 Press MENU , J , 2, 1, [Enter]. The LCD shows:
3 Select “DRD”, then press [Enter].
4 Select “ON” or “OFF” using the cursor key and
then press [Enter].
5 Select the “Ring Pattern” and then press
[Enter].
6 Select the ring pattern you want.
7 Press [Enter] to set your machine to the
selected ring pattern.
Important: If your telephone company gives you only very general ring pattern
specifications, or if you encounter a problem while using your
machine’s
DRD feature, please try ALL of the listed ring patterns.
If you still have a problem after trying all of the patterns, please call
the Muratec Customer Support Center. (From the United States, call
972-364-3350. For the number to call from Canada, check the
documentation found inside your fax machine’s box).
Important: With your machine set for using DRD , it won’t respond to any ring pat-
tern other than the one you selected above. To reset the fax so it will
respond once again to normal rings, repeat steps 2–4, above — except,
in step 4, toggle it to “Off.” Your fax will now respond normally.
3.42