Muratec Fax Machine - Manual (Page 127)

F
ax F
eatures
Getting Started
Changing the dialing pause length
Default setting: 2 sec.
The pause is set by the factory to last two seconds, but you can set it to last as long
as ten seconds if necessary. To change the pause length:
1 Press MENU , J , 0, 4, [Enter].
2 Use the numeric keypad to enter the length you
want for the dialing pause.
Note: The length setting requires two digits.
Always enter a leading zero for lengths
less than 10 seconds.
3 Press ENTER to save the setting.
Changing redial settings
Default setting: Number of redial: 2 times, Redial interval: 1 minute.
It’s up to you how many times the fax redials a number and how long it waits
between redials (that length of time between calls is the redial interval).
To program the redial settings:
1 Press MENU , J , 0, 6, [Enter].
2 Use the numeric keypad to enter the number of
redials you want. Choose from 2 to 15 redials.
Note: Enter a leading zero when entering a
quantity less than 10.
3 Press [Enter] to save the setting.
4 Use the numeric keypad to enter the length you
want between redial attempts. Choose from 1 to
5 minutes.
5 Press [Enter] to save the setting.
6 Press RESET to return to standby mode.
Fax settings
3.75
Settings for dialing