Muratec Fax Machine - Manual (Page 72)

Advanced fax
8 Enter the fax number as described in step 4 on
page 3.17.
9 When the number is as you want it, press
[Enter] to store it.
10 Enter Location I . D ., Alternative number or
Group number as described in steps 7–15 on
pages 3.17–3.18.
Note: If you want to omit these settings, go to step 11.
11 Press [Exit].
Press RESET to finish.
To delete a speed-dial number:
1 Press MENU , B , [Enter].
The LCD shows the speed-dial number list.
2 Select the speed-dial number you want to
delete.
Note: You can select the speed-dial number by
directly entering that three-digit identi-
fier code. When entering the identifier
code for speed-dial numbers less than
100, you must enter leading zeroes to
make three digits. For example, 001-099.
Note: You can press [Detail] to see the number which has been pro-
grammed in that speed-dial number.
3 Press NEXT , [Delete].
4 The machine will ask you if you want to delete
that speed-dial number.
Important: If you want to quit without delet-
ing the speed-dial number you’ve
selected, press [No]. The machine
will return to step 2.
5 Press [Yes].
6 The speed-dial number you selected will be
deleted and other numbers will be shifted
upward.
7 Press RESET to finish.
Printing a list of speed-dial numbers
You can easily print a list of your speed-dial numbers. The list includes each number’s
three-digit identifier, the Location
ID (if any), number and any group numbers
you’ve stored for that speed-dial number.
To print a list of speed-dial numbers, press
MENU , B , [List].
Fax dialing via speed-dial
To dial a fax call using a speed-dial number:
1 Place the document and select the resolution and contrast you require.
2 Toggle between transmission from the feeder or from memory if necessary, by
pressing
MEMORY TRANSMIT .
3 Press SPEED DIAL / TEL INDEX .
4 Use the numeric keypad to enter the three-digit identifier for the speed-dial
number you want to dial.
Note: If the location ID has been programmed, it is shown on the LCD .
Otherwise, the fax number is shown on the LCD .
5 Press START .
3.20