Muratec Fax Machine User Manual
Page 75
Advanced fax
If an EasyDial call fails
If an EasyDial call fails, what happens next depends upon the kind of call it was.
If it was a fax call …
… Your fax machine automatically redials the number according to the redial inter-
val you’ve set (see page 3.75). It keeps trying until either of the following occurs:
• It successfully reaches the other number
• It has attempted the number of redials programmed and has still not connected
(see “Changing redial settings,” page 3.75).
If it was a regular phone call …
… You’ll have to redial manually:
1
Obtain a dial tone by either lifting the handset or pressing
MONITOR
/
CALL
.
2
Press [Redial].
Note: If the call fails and you used
MONITOR
/
CALL
to dial, press
MONITOR
/
CALL
to
hang up. Or if you’ve pressed
START
to begin the transmission, press
STOP
to
end it.
3.23
F
ax F
eatures
Getting Started