Muratec Fax Machine - Manual (Page 46)

Copy settings
B. Erasing center setting
Default setting: OFF, Erased margin: 0.1 inch
The default setting of the erased margins in the erase center function can be
changed within 0.1 – 2.0 inches in 0.1 inch steps.
1 Press MENU , [Copy Set].
2 Select “B.Erase Center setting” and then
press [Enter].
3 To change the default setting of Erase Center,
select “Erase Center” then press [Enter].
4 Select “ON” or “OFF” then press [Enter] to
save the setting.
5 If you want to change the default value of
erased margin, select “Default” then press
[Enter].
6 Enter desired value, then press [Enter].
7 Press [Exit] or RESET to save the default set-
ting.
Note: Press RESET to return to standby.
Note: If you set the default setting to ON, the Erase Center icon will be appeared
on the LCD .
C. Binding margin setting
Default setting: OFF, Binding margins: 0 inch
The default setting of the binding space in the image shift copy function can be
changed within 0.1 – 1.0 inch in 0.1 inch steps.
1 Press MENU , [Copy Set].
2 Select “C.Margin Setting” and then press
[Enter].
3 To change the default setting of the binding
margin, select “Margin” then press [Enter].
4 Select “ON” or “OFF” then press [Enter] to
save the setting.
5 If you want to change the default value of bind-
ing space, select “Default” then press [Enter].
6 Enter desired value using the cursor key, then
press [Enter].
7 Press [Exit] or RESET to save the default set-
ting.
Note: Press RESET to return to standby.
Note: If you set the default setting to ON, the Binding Margin icon will be
appeared on the LCD .
2.26