Muratec Fax Machine - Manual (Page 125)

Fax settings
Adjusting the print settings
Default setting: Rx reduction rate: Normal, Reduction margin: 40 mm,
Paper saving:OFF.
1 Press MENU , J , 0, 2, [Enter].
2 Select item you want to set using the cursor
key. Then press [Enter].
3 Select desired item and then press [Enter].
4 If you want to change other items, repeat step
2-3.
5 When you finish, press [Exit].
6 Press RESET to return to the standby mode.
Setting the number of rings
Default setting: 2 time.
You can set how many times your fax machine will ring before answering a call.
Choose from 1 to 10 rings.
1 Press MENU , J , 0, 5, [Enter]. The LCD shows:
2 Use the numeric keypad to enter the number of
rings you want, from 01 to 10.
Note: If you enter 00 (zero), the machine will
beep briefly to warn you that it can’t
accept that setting.
3 Press [Enter] to save the setting.
4 Press RESET to return to the standby mode.
Setting ECM
Default setting: ON.
“Line noise,” or static on the line during a call, can easily disrupt the flow of data
from one fax machine to another.
That’s why your fax machine gives you the option of using Error Correction Mode
(
ECM ). When two fax machines communicate while running in ECM , the sending
machine automatically checks the data as it sends. If the receiving fax machine can’t
verify the transmission, the first machine will re-send it as necessary.
Note: ECM gives you a better chance of transmitting a fax document over a bad
phone line, but it could also slow down the transmission time. And the worse
the line is, the slower the transmission. That’s why the machine lets you
turn
ECM on or off as needed.
Note: Not all fax machines have ECM . If you’ve activated ECM and then transmit to
a fax machine not currently using ECM , there will be no change in the fax
transmission from a usual, non- ECM transmission.
1 Press MENU , J , 0, 7, [Enter].
The LCD shows the current ECM setting:
2 Select “On” or “Off” using the cursor key.
3 Press [Enter] to save the setting.
4 Press RESET to return to the standby mode.
3.73
F
ax F
eatures
Getting Started