Middleby Marshall PS200 series - Manual (Page 176)

175
SECTION 5 - REFERENCE
Pressure conversion chart
To use this chart, simply place a straightedge so
that it intersects the known value and lies across
the center of the bullseye. Readings on all scales
will then be equivalent.
Ohm’s Law equation wheel
Using this wheel, you can calculate any one of the
following four basic factors of electricity, as long
as two of the others are known:
•
Power - Watts (W), shown as “W”
• Current - Amperes (A), shown as “A”
• Voltage - Volts (V), shown as “E”
• Resistance - Ohms (W), shown as “R”
Choose an equation that will give you the value
that you need based on what values are already
known.