Icom IC-7700 - Manual (Page 130)

■
Frequency transferring
The frequency and operating mode in a memory chan-
nel can be transferred to the VFO. Frequency transfer-
ring can be performed in either VFO mode or memory
mode.
D D Transferring in VFO mode
This is useful for transferring programmed contents to
a VFO.
q Select VFO mode with .
w Select the memory channel to be transferred with
/ .
• Memory list screen is convenient for selecting the de-
sired channel.
• Memory channel contents appear in the memory chan-
nel readout (below the frequency readout).
• “--.---.--” appears if the selected memory channel is a
blank channel. In this case transferring is not possible.
e Push and hold for 1 sec. to transfer the fre-
quency and operating mode.
• Transferred frequency and operating mode appear on
the frequency readout.
D D Transferring in memory mode
This is useful for transferring frequency and operating
mode while operating in memory mode.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
• Displayed frequency, mode and filter setting are
transferred.
• Programmed frequency and mode in the memory
channel are not transferred, and they remain in the
memory channel.
q Select the memory channel to be transferred with
/ in memory mode.
• And, set the frequency or operating mode if required.
w Push and hold for 1 sec. to transfer the fre-
quency and operating mode.
• Displayed frequency and operating mode are transferred
to the VFO.
e To return to VFO mode, push momentarily. V/M
V/M
√ ∫
V/M
√ ∫
V/M
8-4
8
MEMORY OPERATION
TRANSFERRING EXAMPLE IN VFO MODE
Operating frequency : 21.320 MHz/USB (VFO)
Contents of M-ch 16 : 14.018 MHz/CW
TRANSFERRING EXAMPLE IN MEMORY MODE
Operating frequency : 21.320 MHz/USB (M-ch 16)
Contents of M-ch 16 : 14.018 MHz/CW
or
Push for 1 sec.
Beep
Beep
Beep
V/M
Push for 1 sec.
Beep
Beep
Beep
Programmed contents appear.
V/M