Daily timer setting – Icom IC-7700 User Manual
Page 152
11-3
■
Daily timer setting
The transceiver turns power ON and/or OFF automat-
ically on the specified day and time, with the specified
frequency settings.
q
Push
several times to close multi-function
screen, if necessary.
w
Push and hold
for 1 sec. to select timer set
screen.
e
Push one of [F-1•TIMER1] to [F-5•TIMER5] to se-
lect the desired timer.
r
Rotate the main dial to select the timer action ON
and OFF.
t
Push [F-2•
≈
] to select the “DAY” cell, then rotate the
main dial to select the desired day of the week.
• Select “– – –” not to specify the day of the week. The
timer will function every day in this case.
• Once a day of the week is selected, push [F-4•CLR] to
select “– – –.”
y
Push [F-2•
≈
] to select the “REPEAT” cell, then ro-
tate the main dial to select the repeat function ON
and OFF.
• ON : The timer functions every selected day of the
week. (repeats)
• OFF : The timer does not repeat.
u
Push [F-2•
≈
] to select the “ON” cell, then rotate the
main dial to set the desired transceiver power ON
time.
• When using power OFF timer only, push [F-4•CLR] to
select “– – –.” This setting cannot be set when the power
OFF timer is set to “– – –.”
i
Push [F-2•
≈
] to select the “OFF” cell, then rotate the
main dial to set the desired transceiver power OFF
time.
• When using power ON timer only, push [F-4•CLR] to se-
lect “– – –.” This setting cannot be set when the power
ON timer is set to “– – –.”
o
Push [F-2•
≈
] to select the “Mch” cell, then rotate the
main dial to select the desired memory channel
number.
• If using the currently set VFO condition, push [F-4•CLR]
to select “– – –.”
!0
Push [F-7•SET] to set the timer.
• The timer indicator above
switch lights green.
!1
Repeat steps
e
to
!0
to set other timers, if desired.
!2
Push
to exit timer set screen.
EXIT/SET
TIMER
TIMER
EXIT/SET
Main dial
≈
F-2
TIMER2
F-3
TIMER3
TIMER4
EXIT/SET
/
/
Ω
F-1
TIMER1
/
F-4
TIMER5
F-5
F-7
SET
CLR
TIMER
11
CLOCK AND TIMERS