Icom IC-7700 User Manual
Page 132
8-6
8
MEMORY OPERATION
■
Memory names
All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 10 charac-
ters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ’ ` ^ + –
✱
/ . , : ; = < > ( ) [ ] { } | _
~
@)
and spaces can be used.
D
D
Editing (programming) memory names
q
Push
several times to close a multi-func-
tion screen, if necessary.
w
Push [F-4•MEMORY] to select memory list screen.
e
Select the desired memory channel.
r
Push [F-4•NAME] to edit memory channel name.
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
t
Input the desired character by rotating the main dial
or by pushing the keypad for number input.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push [123] or [Symbol] to toggle numerals and symbols.
• Push [F-1•
Ω
] or [F-2•
≈
] for cursor movement.
• Push [F-3•DEL] to delete the selected character.
• Push [F-4•SPACE] to input a space.
• Pushing the transceiver’s keypad, [0]–[9], can also enter
numerals.
y
Push
to input and set the name.
• The cursor disappears.
u
Repeat steps
e
to
y
to program another memory
channel’s name, if desired.
i
Push
to exit memory list screen.
■
Memory clearing
Any unused memory channels can be cleared. The
cleared memory channels become blank channels.
q
Select memory mode with
.
w
Push [F-4•MEMORY] to select memory list screen.
e
Select the desired memory channel with
/
.
r
Push and hold [F-5•CLR] for 1 sec. to clear the con-
tents.
• The programmed frequency and operating mode disap-
pear.
t
To clear other memory channels, repeat steps
e
and
r
.
√
∫
V/M
EXIT/SET
EXIT/SET
EXIT/SET
Push for 1 sec.
Beep
Beep
Beep
(CLR)
F-5
F-5
CLR
Keypad
/
/
F-3
DEL
123
Symbol
ABC
abc
F-1
Ω
F-2
≈
F-4
SPACE