Icom IC-7700 - Manual (Page 159)

■
Level set mode (continued)
12-6
12
SET MODE
Sets the voice synthesizer audio output level from 0 to
100% in 1% steps. (default: 50%)
Speech Level 50%
Sets the side tone output level from 0 to 100% in 1%
steps. (default: 50%)
Side Tone Level 50%
Turns the side tone output level limiting capability from
ON and OFF. (default: ON)
Side Tone Level Limit ON
Sets the key-touch beep output level from 0 to 100%
in 1% steps. (default: 50%)
Beep Level 50%
Turns the key-touch beep output level limiting capa-
bility from ON and OFF. (default: ON)
Beep Level Limit ON
Sets the ratio for audio output level from the head-
phone toward to the internal speaker within a range
of 0.60 to 1.40 in 0.01 steps. (default: 1.00)
Phones Level Ratio 1.00
Sets the transmission passband width to wide setting
by changing the lower and higher cut-off frequencies. Lower freq. : 100 (default), 200, 300 and 500 Hz
Higher freq.: 2500, 2700, 2800 and 2900 Hz (default)
SSB TBW (WIDE) 100 – 2900
Sets the transmission passband width to middle set-
ting by changing the lower and higher cut-off frequen-
cies. Lower freq. : 100, 200, 300 (default) and 500 Hz
Higher freq.: 2500, 2700 (default), 2800 and 2900 Hz
SSB TBW (MID) 300 – 2700
Sets the transmission passband width to narrow set-
ting by changing the lower and higher cut-off frequen-
cies. Lower freq. : 100, 200, 300 and 500 Hz (default)
Higher freq.: 2500 (default), 2700, 2800 and 2900 Hz
SSB TBW (NAR) 500 – 2500